Gsu 25 - Transponder Interconnect/Configuration Example - Garmin G3X Installation Manual

GSU 25
ADAHRS 1 ONLY
CONFIGURATION GUIDANCE
1. GTX 327/328/330(ES)
A.ON THE GTX 327/328/330(ES) RS-232 CONFIG MODE PAGE FOR RS-232 CHANNEL 1
•
SET CONNECTED GTX 327/328/330(ES) RS-232 CHANNEL 1 INPUT FORMAT TO "REMOTE"
•
SET CONNECTED GTX 330(ES) RS-232 CHANNEL 1 OUTPUT FORMAT TO "REMOTE+TIS"
B. ON THE GTX 330(ES) RS-232 CONFIG MODE PAGE FOR RS-232 CHANNEL 2
•
SET RS-232 CHANNEL 2 INPUT FORMAT TO "REMOTE"
C. ON THE GTX 327/328/330(ES) SQUAT SWITCH CONFIG MODE PAGE
•
SET THE SQUAT SWITCH FIELD TO "NO"
D.IF REMOTE CONTROL OF THE TRANSPONDER FROM THE GDU 37X IS DESIRED
•
ON THE GDU 37X XPDR CONFIG MODE PAGE SET TRANSPONDER TYPE TO "GTX
327" OR "GTX 328" OR "GTX 330" OR "GTX 330ES" OR "GTX 33" AS APPROPRIATE
E.NO GSU 25 CONFIGURATION REQUIRED
2. GTX 33(ES)
A.ON THE GDU 37X XPDR CONFIG MODE PAGE
•
SET TRANSPONDER TYPE TO "GTX 33" OR "GTX 33ES" AS APPROPRIATE
B. NO GSU 25 CONFIGURATION REQUIRED
3. GTN 6XX/7XX, GNS 4XXW/5XXW (WHEN ADS-B OUT IS BEING PROVIDED TO ES TRANSPONDER)
A.ON THE GTN/GNS RS-232 CONFIG MODE PAGE
•
SET RS-232 OUTPUT FORMAT TO ADS-B OUT(+) (FOR RS-232 PORT CONNECTED TO
TRANSPONDER RS-232 IN CHANNEL 2)
Figure C-2.4 GSU 25 - Transponder Interconnect/Configuration Example
G3X Installation Manual - G3X w/GSU 25 and/or GAD 29 Interconnect Drawings 190-01115-01
Page C-10 Rev. L