Single Gtn 6Xx/7Xx Interconnect/Configuration Example - Garmin G3X Installation Manual

GAD 29 P292
CONFIGURATION GUIDANCE
1. GTN 6XX/7XX
A. ON THE ARINC 429 CONFIG PAGE
•
SET IN 1 SPEED TO "LOW"
•
SET IN 1 DATA TO "EFIS FORMAT 2"
•
SET OUT 1 SPEED TO "LOW"
•
SET OUT 1 DATA TO "GAMA FORMAT 1"
•
SET SDI TO "LNAV 1"
B. ON THE RS-232 CONFIG PAGE
•
SET CHNL 3 INPUT TO "OFF"
•
SET CHNL 3 OUTPUT TO "MAPMX"
C. ON THE MAIN MAIN INDICATOR (ANALOG) CONFIG PAGE
•
SET SELECTED COURSE FOR VLOC TO "IGNORED"
D. ON THE VOR/LOC/GS ARINC 429 CONFIG PAGE
•
SET NAV RADIO TO "ENABLED"
•
SET TX SPEED TO "LOW"
•
SET SDI TO "VOR/ILS 1"
2. G3X
A. ON THE GDU 37X COMM CONFIG MODE PAGE
•
SET THE CONNECTED GDU 37X (PFD) RS-232 CHANNEL TO "MAPMX"
•
SET ARINC 429 TX 1 FORMAT TO "EFIS/AIRDATA" AND "NAV 1"
•
SET ARINC 429 RX 1 FORMAT TO "GARMIN GPS" AND "NAV 1"
•
SET ARINC 429 RX 2 FORMAT TO "GARMIN VOR/ILS" AND "NAV 1"
Figure C-2.8 Single GTN 6XX/7XX Interconnect/Configuration Example
G3X Installation Manual - G3X w/GSU 25 and/or GAD 29 Interconnect Drawings 190-01115-01
Page C-14 Rev. L