Ads-B Configuration Page; Log Configuration Page; Eng Configuration Page - Garmin G3X Installation Manual

17.3.15 ADS-B Configuration Page

The ADS-B Data Link Configuration Page is only displayed when the unit is configured to communicate
with and has successfully communicated with a GDL 39 (see Appendix D for interface and configuration
info). Aircraft Type should be set to "Not Pressurized". The Mode S Address field is displayed (and is
editable) if configured for a Mode S Transponder or not configured for any transponder. The Mode S
Address field is not displayed if configured for a non-Mode S Transponder, such as a GTX 327.

17.3.16 LOG Configuration Page

The Data Logging Configuration page enables the storage of flight data as .csv files to the "data_log"
folder on an SD card. If data logging is enabled, the files are automatically written to the SD card after it is
inserted into the card slot. These files can be opened in Excel, or imported into Google Earth for viewing
using the Garmin Flight Log Conversion tool. The tool and instructions needed to import the files into
Google Earth are available from the G3X Product Page found on the Garmin website www.garmin.com.
Select On or Off for SD Card Data Logging and set the maximum number of log files to be stored.

17.3.17 ENG Configuration Page

The Engine/Airframe Input Configuration section of the Engine Configuration Page allows enabling/
disabling and customization of the engine/airframe input options that make up the EIS display and the
Engine Page on the MFD. Refer to Section 18 Engine/Airframe Sensor Configuration, for configuring
items listed in the Engine/Airframe Input Configuration section of the Engine Configuration page.
190-01115-01 G3X Installation Manual - Configuration, Sofware, Databases, and XM Activation
Rev. L Page 17-27