Ppp Multilink Interleave Command; Mlp Over Atm-Based Lfi Feature; Multi-Vc Mlp Over Atm-Based Lfi Feature - Cisco 10000 Series Configuration Manual

QoS Features, Commands, and Changes
Cisco IOS Release: Release 12.2
Description: The multilink-group command was changed to ppp multilink group to restrict a physical
link to joining only a designated multilink group interface. The multilink-group command was accepted
by the command line interpreter through Cisco IOS Release 12.2.
Cisco IOS Release: Release 12.2(28)SB
Description: This command was integrated in Cisco IOS Release 12.2(28)SB.
Cisco IOS Release: Release 12.2(31)SB2
Description: This command was introduced on the PRE3.

ppp multilink interleave Command

Cisco IOS Release: Release 12.0(23)SX
Description: The ppp multilink interleave command was introduced on the PRE1 to enable
interleaving of real-time packets among the fragments of larger nonreal-time packets.
Cisco IOS Release: Release 12.2(16)BX
Description: This command was introduced on the PRE2.
Cisco IOS Release: Release 12.2(28)SB
Description: This command was integrated in Cisco IOS Release 12.2(28)SB.
Cisco IOS Release: Release 12.2(31)SB2
Description: This command was introduced on the PRE3.

MLP Over ATM-Based LFI Feature

Cisco IOS Release: Release 12.2(28)SB
Description: The Multilink PPP (MLP) over ATM feature was introduced on the PRE2 to allow you to
fragment and interleave real-time and nonreal-time packets on ATM VCs.
Cisco IOS Release: Release 12.2(31)SB2
Description: This feature was introduced on the PRE3.

Multi-VC MLP Over ATM-Based LFI Feature

Cisco IOS Release: Release 12.2(28)SB
Description: The Multi-VC MLP over ATM-based LFI feature was introduced on the PRE2 to allow you
to fragment and interleave real-time and nonreal-time packets on multiple ATM VCs.
Cisco IOS Release: Release 12.2(31)SB2
Description: This feature was introduced on the PRE3 and the valid interface values changed from 1 to
9999 (Release 12.2(28)SB and later) to from 1 to 9999 and 65,536 to 2,147,483,647
(Release 12.2(31)SB2 and later).
Cisco 10000 Series Router Quality of Service Configuration Guide
1-34
Chapter 1 Quality of Service Overview
OL-7433-09