Map-Class Frame-Relay Command History; Usage Guidelines For The Map-Class Frame-Relay Command; Restrictions And Limitations For Frame Relay Qos Service Policies - Cisco 10000 Series Configuration Manual

Chapter 4 Attaching Service Policies

map-class frame-relay Command History

Cisco IOS Release
12.0(23)SX
12.0(25)S

Usage Guidelines for the map-class frame-relay Command

You can attach a QoS service policy to a Frame Relay map class using the service-policy command. For
more information, see the
You can apply a map class to a Frame Relay interface and subinterface.

Restrictions and Limitations for Frame Relay QoS Service Policies

•
•
•
•
•
•
•
OL-7433-09
Description
This command was introduced on the PRE1.
This command was integrated into Cisco IOS Release 12.0(25)S.
"service-policy Command" section on page
Do not configure Frame Relay services using both the modular QoS command-line interface (MQC)
and the Frame Relay legacy commands.
For Cisco IOS Release 12.0(22)S and later releases, use the MQC to configure QoS services for
Frame Relay interfaces.
For all releases earlier than Cisco IOS Release 12.0(22)S, use the Frame Relay commands to
configure Frame Relay QoS services. For more information, see
Relay QoS Using Frame Relay Legacy Commands."
The router has no preset scaling limit for Frame Relay QoS services. You can apply any number of
Frame Relay QoS services.
The router does not support attaching QoS service policies to Frame Relay point-to-multipoint
subinterfaces.
You cannot attach a policy map and a map class to the same subinterface. For Cisco IOS
Release 12.0(22)S and later releases, use the MQC to create and attach a policy map as described in
this chapter. For all releases earlier than Cisco IOS Release 12.0(22)S, use the Frame Relay legacy
commands to create and attach a Frame Relay QoS policy as described in
Frame Relay QoS Using Frame Relay Legacy Commands."
Output QoS policies that contain queuing actions must be nested service policies.
Attaching Frame Relay QoS Service Policies
Cisco 10000 Series Router Quality of Service Configuration Guide
4-3.
Appendix A, "Configuring Frame
Appendix A, "Configuring
4-13