Attaching Virtual Lan Qos Service Policies; Feature History For Vlan Qos - Cisco 10000 Series Configuration Manual

Quality of service configuration guide
Hide thumbs Also See for 10000 Series:
Table of Contents

Advertisement

Attaching Virtual LAN QoS Service Policies

Configuration Examples for Attaching a QoS Service Policy to a Frame Relay DLCI Using a Map Class
Example 4-11
group1, and attach the map class to DLCI 101 configured on the serial subinterface 1/0/0.2.
Example 4-11 Attaching a QoS Service Policy to a Frame Relay Subinterface DLCI Using a Map Class
Router(config)# map-class frame-relay group1
Router(config-map-class)# service-policy gold
Router(config-map-class)# exit
Router(config)# interface serial 1/0/0.2 point-to-point
Router(config-if)# frame-relay interface-dlci 101
Router(config-fr-dlci)# frame-relay class group1
Example 4-12
named voice, and attach the map class to DLCI 200 configured on the serial interface 3/0/0.
Example 4-12 Attaching a QoS Service Policy to a Frame Relay Interface DLCI Using a Map Class
Router(config)# map-class frame-relay voice
Router(config-map-class)# service-policy Premium
Router(config-map-class)# exit
Router(config)# interface serial 3/0/0
Router(config-if)# frame-relay interface-dlci 200
Router(config-fr-dlci)# frame-relay class voice
Attaching Virtual LAN QoS Service Policies
On Ethernet interfaces with virtual LANs (VLANs) configured, you can attach a QoS service policy to
the physical interface, an individual VLAN subinterface, or to both the physical interface and one or
more VLAN subinterfaces.
This section describes the following topics:

Feature History for VLAN QoS

Cisco IOS Release
12.0(25)SX
12.2(15)BX
12.2(28)SB
Cisco 10000 Series Router Quality of Service Configuration Guide
4-20
shows how to configure a policy map named gold within a Frame Relay map class named
shows how to configure a policy map named Premium within a Frame Relay map class
Feature History for VLAN QoS, page 4-20
VLAN QoS Inheritance, page 4-21
Restrictions and Limitations for Attaching QoS Services to VLAN Subinterfaces, page 4-21
Attaching QoS Policies to VLAN Interfaces and Subinterfaces, page 4-21
Description
The attachment of virtual LAN QoS service policies was
introduced on the router.
This feature was introduced on the PRE2.
This feature was integrated in Cisco IOS
Release 12.2(28)SB for the PRE2.
Chapter 4
Attaching Service Policies
Required PRE
PRE1
PRE2
PRE2
OL-7433-09

Advertisement

Table of Contents
loading

Table of Contents