Cisco 10000 Series Configuration Manual page 125

Chapter 3 Configuring QoS Policy Actions and Rules
Table 3-2
Table 3-2
Policy Map
Actions
bandwidth
queue-limit
priority
shape
random-detect
set ip prec/dscp
set qos-group
set atm-clp
set cos
police
set mpls
experimental
Note In Table 3-2
product or that it has no meaning in the context indicated. "Not Available" means the action is not
supported. When configuring an input policy map for a virtual access interface (VAI), be careful that you
do not include the "Not Applicable" or "Not Available" policy actions indicated. If you do, an error
message appears.
OL-7433-09
lists the input policy actions that you can define in a policy map for specific interface types.
Input Policy Map Actions
Normal
Not Applicable
Not Applicable
Not Applicable
Not Available
Not Applicable
Valid
Valid
Not Applicable
Not Applicable
Valid
Not Available
and Table 3-3, "Not Applicable" indicates that you cannot perform the action on a Cisco
Interface Type
Tag (MPLS VPN) Virtual Access
Not Applicable Not Applicable
Not Applicable Not Applicable
Not Applicable Not Applicable
Not Available Not Available
Not Applicable Not Applicable
Not Applicable Valid
Valid Valid
Not Applicable Not Applicable
Not Applicable Not Applicable
Valid Valid
Not Available Not Available
Cisco 10000 Series Router Quality of Service Configuration Guide
Types of QoS Actions
ATM UBR VCs
Not Applicable
Not Applicable
Not Applicable
Not Available
Not Applicable
Valid
Valid
Not Applicable
Not Applicable
Valid
Not Available
3-5