Cisco 10000 Series Configuration Manual page 668

Shaping and Queuing Per-Session Traffic on LNS
Configuration Example for Configuring a Per Session Shaping and Queuing on LNS Policy
Example 18-9
the router uses 20 overhead bytes and ATM cell tax in calculating ATM overhead. The child and parent
policies contain the required matching offset values. The parent policy is attached to virtual template 1.
Example 18-9 Configuring Per Session Shaping and Queuing on LNS Policy on the Router
policy-map child
policy-map parent
interface virtual-template 1
Verifying Per Session Shaping and Queuing on LNS Policies
To display the configuration of per session shaping and queuing on LNS policies, enter the following
commands in privileged EXEC mode:
Command
Router# show policy-map [policy-map]
Router# show running-config
Verification Examples for Per Session Shaping and Queuing on LNS Policies
Example 18-10
20 overhead bytes in calculating ATM overhead.
Example 18-10 Sample Output—show policy-map Command
Router# show policy-map child
Example 18-11
modifier starts the display at the Parent policy map line.
Example 18-11 Sample Output—show running-config Command
Router# show running-config | begin Parent
Cisco 10000 Series Router Quality of Service Configuration Guide
18-28
shows how to configure a per session shaping and queuing on LNS policy. In this example,
class class1
bandwidth 500 account user-defined 20 atm
class class2
shape average 30000 account user-defined 20 atm
class class-default
shape average 30000 account user-defined 20 atm
service-policy child
service-policy output parent
shows sample output for the show policy-map command. In the example, the router uses
Policy Map child
Class Class1
Average Rate Traffic Shaping
cir 20% account user-defined 20
shows sample output for the show running-config command. In the example, the output
Policy Map Parent
class class1
Chapter 18
Purpose
Displays the configuration of all classes for a specified service
policy map or all classes for all existing policy maps.
policy-map specifies the name of the policy map.
Displays the running configuration on the router. The output
shows the configuration of the policy maps.
Regulating and Shaping Subscriber Traffic
OL-7433-09