Related Documentation - Cisco 10000 Series Configuration Manual

Quality of service configuration guide
Hide thumbs Also See for 10000 Series:
Table of Contents

Advertisement

Chapter 18
Regulating and Shaping Subscriber Traffic
Command
Router# show policy-map session [uid uid-number]
[input | output [class class-name]]
Router# show running-config

Related Documentation

This section provides hyperlinks to additional Cisco documentation for the features discussed in this
chapter. To display the documentation, click the document title or a section of the document highlighted
in blue. When appropriate, paths to applicable sections are listed below the documentation title.
Feature
Class maps
ISG commands
ISG Control Policies
Per session service policy
using RADIUS
Policing
OL-7433-09
Purpose
Displays the QoS policy map in effect for subscriber sessions.
(Optional) uid defines a unique session ID.
(Optional) uid-number is a unique session ID. Valid values are
from 1 to 65535.
(Optional) input displays the upstream traffic of the unique
session.
(Optional) output displays the downstream traffic of the unique
session.
(Optional) class identifies the class that is part of the QoS
policy-map definition.
(Optional) class-name provides a class name that is part of the
QoS policy-map definition.
Displays the running configuration on the router. The output
shows the AAA setup and the configuration of the policy map,
ATM VC, PPPoA or PPPoEoA, dynamic bandwidth selection,
virtual template, and RADIUS server.
Related Documentation
Cisco IOS Quality of Service Solutions Configuration Guide, Release 12.2
Part 8: Modular Quality of Service Command-Line Interface > Configuring
the Modular Quality of Service Command-Line Interface > Modular QoS CLI
Configuration Task List > Creating a Traffic Class
Cisco IOS Quality of Service Solutions Command Reference, Release 12.2
access-list rate-limit -- fair-queue (WFQ) > class-map command
Cisco IOS ISG Command Reference
Cisco IOS Intelligent Services Gateway Configuration Guide, Release 12.2SB.
Configuring ISG Control Policies
Cisco IOS Security Configuration Guide, Release 12.2
Part 2: Security Server Protocols > Configuring RADIUS
Comparing Traffic Shaping and Traffic Policing for Bandwidth Limiting
Cisco 10000 Series Router Quality of Service Configuration Guide
Related Documentation
18-51

Advertisement

Table of Contents
loading

Table of Contents