Cisco 10000 Series Configuration Manual page 434

Verifying the Configuration of Hierarchical Policies
Command
Router# show policy-map interface interface
[input | output]
Router# show policy-map policy-map-name
Router# show policy-map policy-map-name class
class-name
Router# show running-config interface interface
Cisco 10000 Series Router Quality of Service Configuration Guide
13-28
Chapter 13
Purpose
Displays the configuration of all classes configured for all inbound
or outbound policy maps attached to the specified interface.
interface is the name of the interface or subinterface for the policy
configuration you want to display.
input indicates to display the statistics for the attached inbound
policy.
output indicates to display the statistics for the attached outbound
policy.
If you do not specify input or output, the router displays
Note
information about all classes that are configured for all
inbound and outbound policies attached to the interface
you specify.
Displays the configuration of all classes contained in the policy
map you specify.
policy-map-name is the name of the policy map for the
configuration information you want to display.
If you do not specify a policy-map-name, the command displays
the configuration of all policy maps configured on the router.
Displays the configuration of the class you specify. The policy
map you specify includes this class.
policy-map-name is the name of the policy map that contains the
class configuration you want to display.
class-name is the name of the class for the configuration you want
to display. If you do not specify class-name, the router displays
class configuration for all classes in the policy map.
Displays the configuration of the interface you specify that is
currently configured in the running-config file, including any
service policies attached to the interface.
Defining QoS for Multiple Policy Levels
OL-7433-09