Configuring A Per Session Shaping And Queuing On Lns Policy - Cisco 10000 Series Configuration Manual

Quality of service configuration guide

Hide thumbs Also See for 10000 Series:

Table of Contents

Shaping and Queuing Per-Session Traffic on LNS

Configuring a Per Session Shaping and Queuing on LNS Policy

To configure a per session shaping and queuing on LNS policy, enter the following commands beginning

in global configuration mode:

Router(config)# policy-map

policy-map-name

Router(config-pmap)# class class-map-name

Cisco 10000 Series Router Quality of Service Configuration Guide

Creates or modifies the bottom-level child policy.

policy-map-name is the name of the child policy map. The name

can be a maximum of 40 alphanumeric characters.

Assigns the traffic class you specify to the policy map. Enters

policy-map class configuration mode.

class-map-name is the name of a previously configured class map

and is the traffic class for which you want to define QoS actions.

Configuring Dynamic Subscriber Services

Table of Contents