About This Guide - Cisco 10000 Series Configuration Manual

About This Guide

This guide provides information about the Quality of Service (QoS) features supported on the
Cisco 10000 series router and describes how to configure them.
Guide Revision History
Cisco IOS Release
Release 12.2(33)SB2
Description
Added the following new and modified features:
•
Cisco IOS Release
Release 12.2(33)SB
Description
Added the following new and modified features:
•
•
•
•
•
•
•
OL-7433-09
Part Number
OL-7433-08
MLP at LNS with H-QoS & ATM Overgead Accounting—See the
ATM Overhead Accounting" section on page 10-3
Part Number
OL-7433-06
ATM CLP-Based WRED—See the
Detection" section on page
ATM Overhead Accounting—See the
ATM VP Average Traffic Rate—See the ATM VP Average Traffic Rate, Release 12.2(33)SB feature
guide.
AToM Class-Based Match FR
AToM Set ATM CLP Bit Using a Policer—See the
section on page 6-13.
AToM Set Frame Relay DE as Police Action—See the
on page 6-14.
Class-Based Frame Relay DE Bit Matching and Marking—See
the "Class-Based Frame Relay DE Bit Marking" section on page
"Controlling Congestion Using Weighted Random Early
11-11.
"ATM Overhead Accounting" section on page
DE—Chapter 2, "Classifying
"AToM Set ATM CLP Bit Using a Policer"
Cisco 10000 Series Router Quality of Service Configuration Guide
Publication Date
September, 2008
"MLP on LNS with HQoS and
Publication Date
March, 2008
Traffic".
"AToM Set FR DE as Police Action" section
Chapter 2, "Classifying Traffic"
7-17.
2.
and
xxxv