Configuration Example For Multi-Vc Mlp Over Atm-Based Lfi - Cisco 10000 Series Configuration Manual
Quality of service configuration guide
Hide thumbs
Also See for 10000 Series:
- Configuration manual (370 pages) ,
- Troubleshooting manual (70 pages) ,
- Installation manual (14 pages)
Table of Contents
Advertisement
Chapter 16
Fragmenting and Interleaving Real-Time and Nonreal-Time Packets
Configuration Examples for Link Fragmentation and Interleaving
Router(config-if)# ppp timeout retry 5
Router(config-if)# keepalive 30
Router(config-if)# no ip address
Router(config-if)# ppp authentication chap
Router(config-if)# ppp multilink
!
Router(config)# interface atm 4/0/0
Router(config-if)# hold-queue 4096 in
!
Router(config)# interface atm 4/0/0.1 point-to-point
Router(config-if)# pvc 0/32
Router(config-if-atm-vc)# vbr-nrt 100 80 1
Router(config-if-atm-vc)# encapsulation aal5snap
Router(config-if-atm-vc)# protocol ppp virtual-template1
Router(config-if-atm-vc)# ppp multilink group 10020
Configuration Example for Multi-VC MLP Over ATM-Based LFI
Example 16-17
shows how to configure Multi-VC MLP over ATM-based LFI. In the example, the virtual
template named virtual-template 2 is applied to PVCs 101/34, 101/35, and 101/36. Each of these PVCs
is assigned to MLP bundle group 8. Notice that all of the member links have the same encapsulation type.
The router does not support member links with different encapsulation types.
Example 16-17 Configuring Multi-VC MLP Over ATM-Based LFI
Router(config)# access-list 100 permit udp any any precedence critical
!
Router(config)# class-map Gold
Router(config-cmap)# match access-group 100
!
Router(config-pmap)# policy-map Business
Router(config-pmap)# class Gold
Router(config-pmap-c)# priority
Router(config-pmap-c)# police 48
!
Router(config)# interface Multilink8
Router(config-if)# ip address 172.16.0.1 255.255.0.0
Router(config-if)# service-policy output Premium
Router(config-if)# ppp multilink
Router(config-if)# ppp multilink fragment-delay 8
Router(config-if)# ppp multilink interleave
Router(config-if)# ppp multilink group 8
Router(config-if)# ppp chap hostname router2
Router(config)# interface virtual-template2
Router(config-if)# ppp max-configure 110
Router(config-if)# ppp max-failure 100
Router(config-if)# ppp timeout retry 5
Router(config-if)# keepalive 30
Router(config-if)# no ip address
Router(config-if)# ip mroute-cache
Router(config-if)# ppp authentication chap
Router(config-if)# ppp multilink
!
Router(config)# interface atm 6/0/0
Router(config-if)# no ip address
Router(config-if)# hold-queue 4096 in
Router(config-if)# no atm ilmi-keepalive
!
Cisco 10000 Series Router Quality of Service Configuration Guide
16-61
OL-7433-09
Advertisement
Chapters
Table of Contents
