Ppp Multilink Fragmentation Command; Ppp Multilink Fragment Disable Command; Ppp Multilink Group Command - Cisco 10000 Series Configuration Manual

Chapter 1 Quality of Service Overview

ppp multilink fragmentation Command

Cisco IOS Release: Release 12.0(23)SX
Description: The ppp multilink fragmentation command was introduced on the PRE1 to enable
fragmentation.
Cisco IOS Release: Release 12.2(16)BX
Description: This command was introduced on the PRE2.
Cisco IOS Release: Release 12.2
Description: The no ppp multilink fragmentation command was changed to ppp multilink fragment
disable. The no ppp multilink fragmentation command was recognized and accepted through
Cisco IOS Release 12.2.
Cisco IOS Release: Release 12.2(28)SB
Description: This command was integrated in Cisco IOS Release 12.2(28)SB.
Cisco IOS Release: Release 12.2(31)SB2
Description: This command was introduced on the PRE3.

ppp multilink fragment disable Command

Cisco IOS Release: Release 11.3
Description: The ppp multilink fragment disable command was introduced on the PRE1 as
ppp multilink fragmentation.
Cisco IOS Release: Release 12.2
Description: The no ppp multilink fragmentation command was changed to ppp multilink fragment
disable to disable fragmentation. The no ppp multilink fragmentation command was recognized and
accepted through Cisco IOS Release 12.2.
Cisco IOS Release: Release 12.2(28)SB
Description: This command was integrated in Cisco IOS Release 12.2(28)SB.
Cisco IOS Release: Release 12.2(31)SB2
Description: This command was introduced on the PRE3.

ppp multilink group Command

Cisco IOS Release: Release 12.0
Description: The ppp multilink group command was introduced on the PRE1 as multilink-group.
OL-7433-09
Cisco 10000 Series Router Quality of Service Configuration Guide
QoS Features, Commands, and Changes
1-33