Set The Standard Folding Settings - Oce TDS750 User Manual

Set the standard folding settings

Introduction
For print jobs, you use the standard folding settings the key operator defines the settings
for your Océ TDS750 system in the Océ TDS750 Power Logic
For offline folding, you can change the values of the settings on the printer operator
panel when you press the Offline key. You can modify the folder settings on the printer
operator panel for each individual offline folding job. After the job is competed, the default
settings (defined in the Océ TDS750 Power Logic
on the printer operator panel.
For copy jobs, you set the folding settings manually on the scanner operator panel of the
Océ TDS600 and the Océ TC4 scanners. The settings are valid for the individual copy
job. If you use the scanner templates, you can also define the folding settings for a copy
job in the template.
The folding settings for a copy job on the Océ TDS600 scanner are described in the ex-
ample below.
Illustration
[180] Folding settings of the original
Set the folding legend
Press the "Feeding" card in the "Original" section.
1.
Press the function key "Legend location".
2.
Select "Leading" or "Trailing".
3.
Note:
In the drivers, this setting is called the "Folding orientation", with the options "Portrait",
"Landscape" and "Automatic".
Set the standard folding settings
®
Controller application.
®
Controller application) are restored
Chapter 9 - The finishing options 315