Oce TDS750 User Manual page 317

Press the function key "Binding".
2.
Select binding enabled or disabled.
3.
If you selected enabled, enter a range between 15 - 30 mm in increments of 1 mm; default
4.
is 20 mm.
Set the reinforcement
Press the "Finishing" card in the "Print" section.
1.
Press the function key "Binding".
2.
Select "Reinforce" .
3.
Note:
It is not possible to select binding when you reinforce your document.
Set the standard folding settings
Chapter 9 - The finishing options 317