Table of Contents
Advertisement
Load rolls of media
Note:
Do not open more than one roll drawer at a time to prevent overbalance of the printer.
[237] Open the drawer
If necessary, remove any scrap material from the paper roll drawer.
2.
Remove the roll holder from the paper roll drawer.
3.
Press the green knob inside the roll holder (on the right side) to release the locking
4.
mechanism (see the illustration below) and remove the core from the holder.
[238] Press the knob
Slide the roll holder in the new roll of material while pressing the green knob.
5.
Align the roll with the appropriate size indicator on the roll holder and release the locking
6.
mechanism. This line has to be completely visible.
368
Chapter 10 - Maintain the Océ TDS750
Advertisement
Table of Contents
