Oce TDS750 User Manual page 179

Make a copy with removed filing strip along the left-hand side
Press the handle underneath the original guide and move it to the right.
1.
[139] Adjusting the original guide to add or remove a filing strip along the left-hand side
Make all required settings.
2.
Insert the original face down, right aligned with the original guide on the original feed
3.
table.
Illustration
[140] Example of removing the right-hand side of an original
Make a copy with removed filing strip along the right-hand side
Select the required media in the "Custom" section on the operator panel.
1.
Select the 100% value for the " Scale" function.
2.
Make other settings as required.
3.
Feed the original.
4.
Scanning originals with filing strip
Chapter 4 - Use the Océ TDS600 scanner 179