Table of Contents
Advertisement
How to retrieve scanned files via FTP
Retrieve files via an FTP command line prompt
Launch an FTP client.
1.
Enter the "FTP" command.
2.
A DOS box now appears with the FTP prompt.
Enter the "Open" command followed by either the registered name of the Océ Power
3.
®
Logic
Controller or the IP address (for example: 194.2.66.146) to connect to the con-
troller and press Enter: "open 194.2.66.146".
The connection with the controller is now established and a window appears asking you
for a user name.
Enter your user name, "Anonymous", and enter as your password, also "Anonymous".
4.
A connection is now set up for the default user "Anonymous".
Set the transmission mode to binary by entering "Binary".
5.
Go to the "Tempstore" directory using the following command: "cd tempstore'".
6.
Go to the "Scan" directory if you want to retrieve a file from a destination on the local
7.
host,
or
go to the "Unsent" directory if you want to retrieve a file from the "Unsent" folder on
the local host.
Get the data file (for example: bugatti.tif) via the "Get" command.
8.
Quit FTP by entering the "bye" command.
9.
260
Chapter 5 - The Océ TDS750 Power Logic
®
Controller application
Advertisement
Table of Contents
