Table of Contents
Advertisement
The printer operator panel
An indication that a particular roll or cut sheet tray is empty. An empty roll is repre-
sented by a dotted roll symbol. An empty cut sheet tray is displayed as an empty paper
tray.
In the event of an error, a graphical representation of any error location (cover or
panel) is displayed together with instructions on how to solve the problem.
The counter
On the operator panel of the Océ TDS750 printer, a counter is displayed to give the user
feedback about the progress of the job that is currently being printed. The counter, which
is located at the bottom of the upper window on the operator panel, displays the number
of sets and/or pages printed. Counting starts at 1.
The following information is available.
When no sets are made, only the current page and the total number of pages are dis-
played (e.g. "Page 3 of 5"). At the beginning of a job, when the system does not know
the total number of pages yet, only the current page may be displayed (e.g. "Page 5").
With set input: set counter. In this case the counter shows the current, the total
number of sets and the current page (e.g. "Set 3 of 5, Page 10"). At the beginning of
a job, when the system does not know the total number of sets yet, only the current
set and page may be displayed (e.g. "Set 2, Page 5").
With set input: multiple sheet counter. In this case the counter shows the current
page, the total number of pages and the current copy, e.g. "Page 2 of 12, Copy 5").
At the beginning of a job, when the system does not know the total number of pages
yet, only the current page and copy may be displayed (e.g. "Page 2, Copy 5").
40
Chapter 1 - Introduction
Advertisement
Table of Contents
