Table of Contents
Advertisement
No.
4+5
6
The display
The graphical (LCD) display offers feedback about the current printer status. It provides
you with the following information.
Status information (e.g. "Preparing for run" or "Ready to print"). During normal
operation the following message types may appear:
-Status/action message: indicates the actual status of the printer plus the action to be
taken, e.g. "Roll empty. Feed A2, plain paper".
-Warning message: during a warning message the printer will continue to operate, but
it is possible that the print quality is not optimal, e.g. "Fill TDS750 toner".
-A graphical overview of available rolls and sheet feeders, including the material type
and size used by each roll or sheet feeder.
A symbol indicating the paper orientation (for cut sheet tray only).
Key types
Function
Selection
The selection keys are located immediately below the
keys
graphical display.
The left key can be used to activate one of the main
menu choices (Language, Folding or Media) on the
left part of the display.
The right selection key can be used to activate the
options on the right part of the graphical display.
Online key
Use the Online key to put the printer online or offline.
If the green light above the Online key is on, the printer
is online; if this light is off, the printer is offline.
Note:
A shadow highlighting effect is used to indicate
the active menu option.
Note:
To identify the active selection, the dotted line
around this selection is changed into an unin-
terrupted line and the small selection triangles
next to the specified option are no longer
dimmed. These selection triangles indicate that
you can select an option from a predefined list
with the help of the Up/Down key.
The printer operator panel
Chapter 1 - Introduction
39
Advertisement
Table of Contents
