Table of Contents
Advertisement
A setting that contains a list of values, like 'Lighter/darker'.
Open the setting with the scroll-wheel key.
Define the required value with the scroll wheel. The value and icon changes.
Close the setting with the scroll-wheel key.
A setting that contains a list of settings, like 'Media'.
Focus on a setting with the scroll wheel. The bold text of a value indicates the focus
of the scroll wheel. The icon changes.
Open the setting with the scroll-wheel key. The list of values appears.
Define the required value with the scroll wheel. The value and icon changes.
Close the setting with the scroll-wheel key.
Note:
You can enter a numeric value with the numeric keys. To enter a negative numeric value,
scroll to a negative value first and than enter the value with the numeric keys.
Select 'Close' with the lower-scroll-wheel key.
6.
Repeat from step 4 to define the next setting.
7.
Note:
Use the 'Defaults' option at the lower-left key to set all settings of the job template to
default.
Use the scanner operator panel
Chapter 3 - Use the Océ TC4 scanner
77
Advertisement
Table of Contents
