Scanning originals with filing strip
Illustration
[141] Example of adjusting the leading or trailing strip of an original
Copy with removed filing strips along the leading and trailing strip
Open the "Sheet" card in the "Original" section.
1.
Press the "Remove strip" function key.
2.
[142] Removing strip
Adjust the values in mm for the trailing strip using the numeric or arrow keys.
3.
Press the "Remove strip" function key again.
4.
Adjust the values in mm for the leading strip using the numeric or arrow keys.
5.
Make other settings as required.
6.
Feed the original.
7.
Copy with added filing strips along the leading and trailing strip
Open the "Layout" card in the "Copy" section.
1.
Press the "Add strip" function key.
2.
[143] Adding strip
180
Chapter 4 - Use the Océ TDS600 scanner