Turn on and off the controller
The printer can be in standby mode, in sleep mode or it can be turned off completely.
1.
Press the On / Off key at the front of the printer to turn on the controller inside the
printer. The green LED turns on.
Note:
This action only turns on the controller. Separately from this action, you can turn on the
printer and scanner.
Press the On / Off key at the front of the printer to turn off the controller inside the
2.
printer. The green LED turns off 30-60 seconds after you have pressed the key.
Illustration
[18] On / Off switch on the Océ TC4 scanner
Turn on and off the Océ TC4 scanner
Set the On/Off switch to position "1". The green LED turns on. The message "Ready
1.
to scan" appears.
Set the On/Off switch to position "0".
2.
Turn on and off the Océ TDS750
Chapter 1 - Introduction
35