Oce TDS750 User Manual page 254

Define file names
Manual file name definition
Select a destination in the 'Scan jobs' workspace.
1.
Open the "File" menu and select "Properties". The "properties" window appears.
2.
Check or uncheck the check box "Add the appropriate file extension" to add or leave out
3.
the file extension. Set the file extension in the 'Preferences' workspace of the Power Logic
Controller application.
Enter a name in the "Base name" text box. Remove the "###" part, this part is used for
4.
automatic file naming. You can put dots in the "Base name".
Click "Apply" to accept the destination properties. The "properties" window stays open
5.
and is ready for the next scan-to-file action after the current original is scanned.
Scan the original.
6.
Repeat step 4, 5 and 6 for each original.
7.
254
Chapter 5 - The Océ TDS750 Power Logic
®
Controller application
®