Set The Standard Folding Settings - Oce TDS700 User Manual

Set the standard folding settings

Introduction
For print jobs, you use the standard folding settings the key operator defines the
settings for your Océ TDS700 system in the Océ TDS700 Power Logic
application.
For off-line folding, you can change the values of the settings on the printer operator
panel when you press the off-line key. You can modify the folder settings on the
printer operator panel for each individual off-line folding job. After the job is
competed, the default settings (defined in the Océ TDS700 Power Logic
application) are restored on the printer operator panel.
For copy jobs, you set the folding settings manually on the scanner operator panel of
the productive scanner and the flexible scanner. The settings are valid for the
individual copy job. If you use the scanner templates, you can also define the folding
settings for a copy job in the template.
The folding settings for a copy job on the productive scanner are described in the
example below.
Illustration
[168]
[168] Folding settings of the original
Set the folding legend
Press the 'Feeding' card in the 'Original' section.
1.
Press the function key 'Legend location'.
2.
Select 'Leading' or 'Trailing'.
3.
Note: In the drivers, this setting is called the 'Folding orientation', with the options
'Portrait', 'Landscape' and 'Automatic'.
Set the standard folding settings
®
controller
®
controller
305