Oce TDS750 User Manual page 316

Set the standard folding settings
Set the drawing method
Press the "Feeding" card in the "Original" section.
1.
Press the function key "Drawing method".
2.
Select "Standard", "Ericsson" or "Afnor".
3.
Illustration
[181] Folding settings of the print
Set the folding method
Press the "Finishing" card in the "Print" section.
1.
Press the function key "Folding".
2.
Select "First fold only", "Full" or "Off".
3.
Set the folded print delivery
Press the "Finishing" card in the "Print" section.
1.
Press the function key "Folded print delivery".
2.
Select "Stacker" or "Belt".
3.
Set the folded package width
Press the "Finishing" card in the "Print" section.
1.
Press the function key "Folded package".
2.
Select "Width". Enter a range between 186 - 230 mm in steps of 1 mm; default is 210
3.
mm.
Set the binding strip
Press the "Finishing" card in the "Print" section.
1.
316 Chapter 9 - The finishing options