Table of Contents
Advertisement
Insert a new tape roll
Turn the two guide plates away from the pin roller and lock the two guide plates into
2.
their open position.
[200] Opening the guide plates
Remove the trailing strip of the old tape.
3.
[201] Removing the trailing strip of the old tape
Open the front side plate of the roll holder (remove the screw and the old kernel.)
4.
Note:
Clean the reinforcement knives before you put in a new roll. See
knives' on page 343
334
Chapter 9 - The finishing options
Clean the reinforcement knives
'Clean the reinforcement
Advertisement
Table of Contents
