Table of Contents
Advertisement
Scanner templates
Icon
In the Océ TDS750 Power Logic
the scanner template settings. The key operator can change the job template names, except
for "Last used", for example into the following job names.
Single copy
Set copy
Matrix copy
Scan-to-file
Last used
When you select the "Last used" job template, the scanner recalls all the settings from
the previous job. You can change the settings or do the same job again. The "Last used"
job template does not display when you turn on the scanner. After you select a scanner
template, the sections display. The sections provide access to the settings for the scanner
input, the printer output and the scan-to-file output
panel' on page
referred to the type of job.
When the scanner templates are active, you also have a separate section to define the fol-
lowing default scanner settings. The illustration below shows the "Preference" settings.
Automatic feed
Rewind original
Language
Account (optional)
[106] The scanner templates - Preference
130
Chapter 4 - Use the Océ TDS600 scanner
®
126. Use the Custom Card here to provide access to frequently used settings
Description
Scan-to-file with check print
Controller application the key operator configures
'Sections on the scanner operator
Advertisement
Table of Contents
