Usb Driver Installation; Install The Usb Driver (Windows) - Roland Studio-Capture Amplifier Owner's Manual

USB Driver Installation

A USB driver is software installed on your computer that handles data sent between your
computer's software and the STUDIO-CAPTURE .
In order to use the STUDIO-CAPTURE with a computer, the USB driver must be installed .
NOTE
Do not connect the STUDIO-CAPTURE to the computer until you are directed to do so .
MEMO
Refer to the Roland website for the latest USB drivers and information about compatibility with
the latest operating system versions .
http://www.roland.com/support/

Install the USB Driver (Windows)

1.
Connect the AC adaptor (p . 10) .
2.
Start up the computer without the STUDIO-CAPTURE connected .
Exit all applications that are running .
Windows 8
Switch to the "Desktop . "
3.
Insert the included "STUDIO-CAPTURE Driver CD-ROM" into the DVD-ROM drive .
4.
Double-click the [Setup] icon in the [WinDriver] folder on the CD-ROM .
The installer starts .
5.
Follow the instructions on the screen and install the software .
5-1 .
When a confirmation screen regarding user account control appears, click the [Yes] button
or [Continue] button .
5-2 .
When "The STUDIO-CAPTURE Driver will be installed on your computer . " appears, click the
[Next] button .
5-3 .
Click the [Next] button again .
MEMO
• If a dialog box regarding Windows security appears, click the [Install] button .
• If the "Software Install" dialog box appears, click the [Continue] button .
11