Roland Studio-Capture Amplifier Owner's Manual page 50

Advanced Operation
6.
In the lower left of the screen, click the [STUDIO-CAPTURE] button .
The state of the first STUDIO-CAPTURE unit will be shown .
7.
Switch to the direct mixer control screen, and check to make sure that the sliders for
channels 15–16 of DIRECT MIXER A are sufficiently raised .
8.
In order to monitor in stereo, set the channel 15 PAN to far left (100%L) and the
channel 16 PAN to far right (100%R) .
9.
From the "Device" menu, choose [Open the Patchbay] .
The PATCHBAY screen will appear .
10.
Make sure that "MONITOR A" is selected in the OUTPUT 1–2 field .
If something else is selected, change it to "MONITOR A . "
All input signals of the second STUDIO-CAPTURE unit will be output from the PHONES jack of the
first unit .
Changing the sampling rate
1.
Change the sampling rate of the second unit (the unit that is set to
STUDIO-CAPTURE EXP) as described in "Sampling Rate Setting" (p . 53) .
50