Roland Studio-Capture Amplifier Owner's Manual page 33

Direct monitors A–D
Here you can control the monitor level and balance of the audio data being input via INPUT 1–16
jacks .
If this is on, settings other than
PAN will be linked in stereo (refer
to the column on this page) .
Switches muting on/off .
Switches solo on/off (refer to p . 35's
column) .
Shows the level of the signal that
is input to the mixer .
MEMO
Direct monitor "A" can be controlled from the STUDIO-CAPTURE unit itself (p . 23) .
Changing what happens when the [STEREO] button is turned on
You can specify whether the [STEREO] button of the same channels in the preamp
control screen and the monitor mixer control screen (p . 32) will be linked when you click
the [STEREO] button .
In the STUDIO-CAPTURE Control Panel, click the "Device" menu, then click [Device
Settings] and make this setting .
Value
INDIV .
PAIRED
Using the STUDIO-CAPTURE Control Panel
Explanation
Stereo link can be turned on/off individually for the preamp and
the monitor mixer .
Stereo link will turn on/off simultaneously for the preamp and the
monitor mixer .
Adjusts the send level to the reverb
unit (direct monitor A only) .
For more about the reverb unit on/
off and type settings, refer to "Reverb"
(p . 35) .
Specifies the panning of the sound .
Adjusts the monitor level of the audio
input signal .
33