Roland Studio-Capture Amplifier Owner's Manual page 44

Changing the System Settings
Parameter
CLEAR MUTE/
SOLO
DIM SOLO
STEREO LINK
AUTO-OFF
INITIALIZE
VERSION
44
Explanation
Initializes the mute and solo settings of the channels .
To initialize the settings, turn the [VALUE] knob to choose "Yes" and then press the [VALUE]
knob ([MENU] button) . If you decide not to clear the settings, choose "No, " and then press
the [VALUE] knob ([MENU] button) .
Specifies the level of channels that are not being soloed in the monitor mixer .
For details, refer to "Changing how the [SOLO] button works" (p . 35) .
Switches the monitor mixer's stereo link function .
For details, refer to "Changing what happens when the [STEREO] button is turned on" (p . 33) .
When not connected to a computer, the STUDIO-CAPTURE will automatically be switched
off four hours after you stop playing or operating it (if the factory settings have been
unmodified) .
For details, refer to "Making the Power Automatically Turn Off After a Time (Auto Off )" (p . 17) .
Initializes the system settings .
For details on the values, refer to "Initializing the Settings" (p . 41) .
When you select the item to be initialized, a confirmation message will appear . To initialize
the settings, turn the [VALUE] knob to choose "Yes" and then press the [VALUE] knob
([MENU] button) . If you decide not to clear the settings, choose "No, " and then press the
[VALUE] knob ([MENU] button) .
* If you want to restart the Factory Settings, refer to "Restoring the Factory Settings (Factory
Reset)" (p . 54) .
Display the version .