Roland Studio-Capture Amplifier Owner's Manual page 10

Panel Descriptions
DC IN jack
Connect the included AC adaptor .
Place the AC adaptor so the side with the
indicator (see illustration) faces upwards
and the side with textual information
faces downwards .
* The indicator will light when you plug
the AC adaptor into an AC outlet .
USB port
Connect this to a computer that supports USB
2 .0 .
Install the USB driver before you make this
connection (p . 11) .
Ground terminal
Refer to "Grounding" (p . 76) .
10
AC Outlet
Power Cord
LINE OUT 1L, 2R, 3–8 jacks
Connect these to devices that are able to receive analog
audio signals, such as amplified speakers .
MONITOR OUT will be output to the LINE OUT 1L and 2R
jacks .
If you're capturing a band performance and want a different
monitor balance for each performer, connect monitor
speakers to the LINE OUT 3–8 jacks as well (p . 45) .
MIDI IN, OUT connectors
Connect the MIDI OUT connector to an external MIDI
sound module, etc .
Connect the MIDI IN connector to a MIDI keyboard or
MIDI controller .
COAXIAL OUT (9/10) jack
Connect a device that is able to receive digital audio
signals, such as a speaker equipped with digital
input . Alternatively, you can connect an additional
STUDIO-CAPTURE unit (p . 46) .