Roland Studio-Capture Amplifier Owner's Manual page 31

Compressor
Disables the compressor .
Select a compressor preset .
Specifies the signal level at which
the compressor begins operating .
(dB)
Make detailed compressor settings .
Compressor presets
You can save your favorite settings as user presets, and load them later when you need
them .
To save
To load
Using the STUDIO-CAPTURE Control Panel
Click [PRESET], then [Store . . .], then the save-destination preset number (U00–U15),
and enter a preset name of up to 16 characters .
Click [PRESET], then [User Preset], then the preset number that you want to load
(U00–U15) .
The OUT meter shows the status of
the signal that is output from the
compressor .
The GR meter shows the amount
of gain reduction applied by the
compressor .
Mutes signals below the specified
level . (dB)
Specifies the compression ratio
at which the audio signal is to be
compressed .
Adjusts the output level of the compressor . (dB)
Adjusts whether the compressor will start being
applied abruptly when the threshold level is
exceeded, or will change smoothly and gradually
around the threshold level .
Specifies the time from when the input level falls
below the threshold level until the compressor
stops operating . (msec)
Specifies the time from when the input level
exceeds the threshold until the compressor begins
to operate . (msec)
31