Roland Studio-Capture Amplifier Owner's Manual page 12

USB Driver Installation
6.
When "Ready to install the driver . " appears, connect the STUDIO-CAPTURE to the
computer using the USB cable, and then hold down the [
several seconds to turn on the power .
MEMO
If a message appears, follow the instructions on the screen .
Windows XP
If using Windows XP, follow the instructions on the screen and continue the installation .
6-1 .
If a dialog box that asks whether you want to connect to
Windows Update appears, select the [No, not this time]
button and click the [Next] button .
6-2 .
Select the [Install the software automatically
(Recommended)] button and click the [Next] button .
6-3 .
If the "Hardware Installation" dialog box appears, click the
[Continue Anyway] button .
6-4 .
When "Completing the Found New Hardware Wizard" appears,
click the [Finish] button .
7.
When "Installation has been completed . " appears, click the
[Close] button .
The installer exits .
MEMO
If the "Change System Settings" dialog box appears, click the [Yes] button . Windows restarts .
12
] (power) button for