Roland Studio-Capture Amplifier Owner's Manual page 55

Setting Explanation
You can display the current sampling rate . To change the sampling rate, select a
sampling rate from the menu .
SAMPLE RATE
* The sampling rate cannot be changed during playback or recording, or when
You can display the current clock source .
INTERNAL
CLOCK
EXTERNAL
You can adjust the input and output audio buffer size .
Decrease the buffer size to decrease latency . Increase the buffer size if audio drops
out .
Audio Buffer Size
* After adjusting the buffer size, make sure to restart all programs that are using the
Use ASIO Direct Check this if you are using the ASIO Direct Monitor function with an ASIO-compatible
Monitor
application .
This reduces the load on the CPU when the ASIO buffer size is small . If you experience
clicks or pops with a small buffer size, selecting this check box may help .
* If you are still unable to play/record, or if you still experience clicks and pops, clear
Reduce CPU load
* If you're using the STUDIO-CAPTURE in WDM/KS mode, leave this check box cleared .
* This setting has no effect if you're using two STUDIO-CAPTURE units (VS EXPAND) .
Select this check box if you're using two STUDIO-CAPTURE units (p . 46) . If this check box
is selected, the status of the connection will be shown .
VS EXPAND
* If you're using only a single STUDIO-CAPTURE unit, nothing will be shown .
Windows 8/
You can match the Windows sound sampling rate (e .g ., MME, DirectSound, or WASAPI)
Windows 7/
with the ASIO sampling rate . Select this check box when using an ASIO-compatible
Windows Vista
application concurrently with an application, such as Windows Media Player, that is
compatible with Windows sound .
Match the sample
rate with ASIO
If this check box is selected, you can use all audio channels via one WDM audio port .
Windows XP
Check this if you are using Cakewalk software, such as SONAR, with WDM/KS mode .
Use Multichannel
* The modified setting will take effect after you turn the power of the
WDM Audio Port
* If this check box is selected, you cannot use the WDM audio ports as 2-channel
[Show "README"] This displays the online manual for the driver .
equipment is connected to the COAXIAL IN (15/16) jack .
The internal clock is operating .
The clock is operating in sync with the equipment connected to the
COAXIAL IN (15/16) jack .
* The sampling rate of the input digital signal is also displayed .
STUDIO-CAPTURE . If using software that has an "audio device test" function, run the
test function .
this check box and increase the "Audio Buffer Size . "
STUDIO-CAPTURE on/off .
(stereo) audio ports .
Appendices
55