Roland Studio-Capture Amplifier Owner's Manual page 57

3.
Confirm that [STUDIO-CAPTURE] appears in the "MIDI Studio" window .
If [STUDIO-CAPTURE] does not appear or if it is grayed out, it means that the STUDIO-CAPTURE is
not being detected properly .
In this case, click the [Rescan MIDI] icon . Also, try turning the STUDIO-CAPTURE off and then on
again .
4.
Click the [Add Device] icon once .
One [new external device] icon will appear .
5.
Click the added [new external device] icon and then click the [Show Info] icon .
6.
Enter "STUDIO-CAPTURE" in the [Device Name]
field and then click the [Apply] button .
7.
Using your mouse, drag and connect the [
[ ] buttons (which represent the input/
output ports of each device) of the existing
[STUDIO-CAPTURE] and the newly added
[STUDIO-CAPTURE] so that they are connected as shown in the figure .
3
4
9
7
]
5
New Device
Appendices
8, 10
57