Rule Configuration: Application Rule Configuration - ZyXEL Communications NBG4615 User Manual

Chapter 26 Bandwidth Management
Table 80 Management > Bandwidth Management > Advanced (continued)
LABEL
Application List
#
Priority
Category
Service
Advanced Setting
User-defined
Service
#
Enable
Direction
Service Name
Category
Modify
Apply
Cancel

26.5.1 Rule Configuration: Application Rule Configuration

If you want to edit a bandwidth management rule for a pre-defined service or application, click the
Edit icon in the Application List table of the Advanced screen. The following screen displays.
200
DESCRIPTION
Use this table to allocate specific amounts of bandwidth based on a pre-defined
service.
This is the number of an individual bandwidth management rule.
Select a priority from the drop down list box. Choose High, Mid or Low.
• High - Select this for voice traffic or video that is especially sensitive to jitter
(jitter is the variations in delay).
• Mid - Select this for "excellent effort" or better than best effort and would
include important business traffic that can tolerate some delay.
• Low - Select this for non-critical "background" traffic such as bulk transfers
that are allowed but that should not affect other applications and users.
This is the category where a service belongs.
This is the name of the service.
Select the check box to have the NBG4615 apply this bandwidth management
rule.
Click the Edit icon to open the Rule Configuration screen where you can
modify the rule.
Use this table to allocate specific amounts of bandwidth to specific applications
or services you specify.
This is the number of an individual bandwidth management rule.
Select this check box to have the NBG4615 apply this bandwidth management
rule.
Select To LAN&WLAN to apply bandwidth management to traffic from WAN to
LAN and WLAN.
Select To WAN to apply bandwidth management to traffic from LAN/WLAN to
WAN.
Enter a descriptive name for the bandwidth management rule.
This is the category where a service belongs.
Click the Edit icon to open the Rule Configuration screen. Modify an existing
rule or create a new rule in the Rule Configuration screen. See
on page 201 for more information.
Click the Remove icon to delete a rule.
Click Apply to save your customized settings.
Click Cancel to begin configuring this screen afresh.
Section 26.5.2
NBG4615 User's Guide