Navigation Panel - ZyXEL Communications NBG4615 User Manual

Chapter 9 Router Mode
Table 30 Status Screen: Router Mode (continued)
LABEL
Current Date/Time
System Resource
- CPU Usage
- Memory Usage
System Setting
- Firewall
- Bandwidth
Management
- UPnP
- Configuration Mode
IPv6 Status
Item
Data
IPv6 Connection Type
LAN IPv6 Link Local Address
Summary
BW MGMT Monitor
DHCP Table
Packet Statistics
WLAN Station Status
Interface Status
Interface
Status
Rate

9.2.1 Navigation Panel

Use the sub-menus on the navigation panel to configure NBG4615 features.
68
DESCRIPTION
This field displays your NBG4615's present date and time.
This displays what percentage of the NBG4615's processing ability is currently used. When
this percentage is close to 100%, the NBG4615 is running at full load, and the throughput is
not going to improve anymore. If you want some applications to have more throughput, you
should turn off other applications (for example, using bandwidth management.)
This shows what percentage of the heap memory the NBG4615 is using.
This shows whether the firewall is enabled or not.
This shows whether the bandwidth management is enabled or not.
This shows whether UPnP is enabled or not.
This shows the web configurator mode you are viewing - Expert.
This column shows the type of data the NBG4615 is recording.
This column shows the actual data recorded by the NBG4615.
This shows the type of IPv6 connection that is currently in use.
This shows the NBG4615's LAN IPv6 link local address.
Click Details... to go to the Monitor > BW MGMT Monitor screen
47). Use this screen to view the amount of network bandwidth that applications running in
the network are using.
Click Details... to go to the Monitor > DHCP Table screen
this screen to view current DHCP client information.
Click Details... to go to the Monitor > Packet Statistics screen
Use this screen to view port status and packet specific statistics.
Click Details... to go to the Monitor > WLAN Station Status screen
49). Use this screen to view the wireless stations that are currently associated to the
NBG4615.
This displays the NBG4615 port types. The port types are: WAN, LAN and WLAN.
For the LAN and WAN ports, this field displays Down (line is down) or Up (line is up or
connected).
For the WLAN, it displays Up when the WLAN is enabled or Down when the WLAN is
disabled.
For the LAN ports, this displays the port speed and duplex setting or N/A when the line is
disconnected.
For the WAN port, it displays the port speed and duplex setting if you're using Ethernet
encapsulation. This field displays N/A when the line is disconnected.
For the WLAN, it displays the maximum transmission rate when the WLAN is enabled and N/
A when the WLAN is disabled.
(Section 6.4 on page
(Section 6.5 on page 47). Use
(Section 6.6 on page 48).
(Section 6.7 on page
NBG4615 User's Guide