ZyXEL Communications NBG4615 User Manual page 158

Chapter 17 WAN
This screen displays when you select L2TP encapsulation.
Figure 100 Network > WAN > Internet Connection: L2TP Encapsulation
The following table describes the labels in this screen.
Table 62 Network > WAN > Internet Connection: L2TP Encapsulation
LABEL
ISP Parameters for Internet Access
Connection Type
User Name
Password
Retype to Confirm
L2TP Configuration
Server IP Address
Get automatically
from ISP
Use Fixed IP Address
158
DESCRIPTION
To configure a L2TP client, you must configure the User Name and
Password fields for a layer-2 connection and the L2TP parameters for an
L2TP connection.
Type the user name given to you by your ISP.
Type the password associated with the User Name above.
Type your password again to make sure that you have entered is correctly.
Type the IP address of the L2TP server.
Select this option If your ISP did not assign you a fixed IP address. This is
the default selection.
Select this option If the ISP assigned a fixed IP address.
NBG4615 User's Guide