Using Multiple Ssids On The Nbg4615 - ZyXEL Communications NBG4615 User Manual

Check the status of your wireless connection in the screen below. If your wireless connection is
7
weak or you have no connection, see the Troubleshooting section of this User's Guide.
If your connection is successful, open your Internet browser and enter
URL of any other web site in the address bar. If you are able to access the web site, your wireless
connection is successfully configured.

14.4 Using Multiple SSIDs on the NBG4615

You can configure more than one SSID on a NBG4615 when it is operating in access point or
universal repeater mode. This allows you to configure multiple independent wireless networks on
the NBG4615 as if there were multiple APs (virtual APs). Each virtual AP has its own SSID, wireless
security type and MAC filtering settings. That is, each SSID on the NBG4615 represents a different
access point/wireless network to wireless clients in the network.
Clients can associate only with the SSIDs for which they have the correct security settings. Clients
using different SSIDs can access the Internet and the wired network behind the NBG4615 (such as
a printer). You can allow communication between wireless clients of different SSIDs in the
Network > Wireless LAN > General screen. See
NBG4615 User's Guide
http://www.zyxel.com
Section 15.2 on page 128
Chapter 14 Tutorials
or the
for more information.
111