ZyXEL Communications NBG4615 User Manual page 116

Chapter 14 Tutorials
Enter the password and click Login to access the web configurator again. Click Expert Mode.
9
10 Go to Configuration > Network > Wireless LAN > Universal Repeater to connect the
NBG4615 wirelessly to an AP. Select Enable. Enter the SSID of the existing AP or wireless router to
which you want to connect ("SSIDofMyAP" in this example). Enter the wireless security settings
which are the same as those on the existing AP or wireless router to access it (WPA-PSK and
"KeyofMyWirelessNetwork" in this example). Click Apply.
11 Set the channel number in the Wireless LAN > General screen to be the same as the one on the
wireless router or AP to which the NBG4615 is connecting. This allows wireless clients access or
acquire an IP address from another AP or wireless router through the NBG4615 in universal
repeater mode.
116
NBG4615 User's Guide