23.1 Overview
Routing Information Protocol (RIP) is an interior or intra-domain routing protocol that uses
distance-vector routing algorithms. RIP is used on the Internet and is common in the NetWare
environment as a method for exchanging routing information between routers.
23.2 RIP Screen
Use this screen to enable RIPv1 or RIPv2, which are LAN broadcast protocols. Click Network >
RIP. The screen appears as shown.
Figure 119 Network > RIP
The following table describes the labels in this screen.
Table 75 Network > RIP
LABEL
RIP
Apply
Cancel
NBG4615 User's Guide
C
DESCRIPTION
Select the RIPv1 or RIPv2 you want the NBG4615 to use.
Otherwise select None.
Click Apply to save your changes back to the NBG4615.
Click Cancel to begin configuring this screen afresh.
HAPTER
2 3
RIP
185