ZyXEL Communications NBG4615 User Manual page 92

Chapter 12 WISP Mode
Table 38 Status Screen: WISP Mode (continued)
LABEL
Sys OP Mode
WAN Information
- MAC Address
- IP Address
- IP Subnet Mask
- Default Gateway
- DHCP
LAN Information
- MAC Address
- IP Address
- IP Subnet Mask
- DHCP
WLAN Information
- WLAN OP Mode
- MAC Address
- Status
- Name (SSID)
- Connect Status
- Security Mode
- 802.11 Mode
System Status
Item
Data
System Up Time
Current Date/Time
System Resource
- CPU Usage
- Memory Usage
System Setting
- Firewall
- Bandwidth
Management
- UPnP
- Configuration Mode
Summary
BW MGMT Monitor
92
DESCRIPTION
This is the device mode (Section 7.1.2 on page
Mode.
This shows the WAN Ethernet adapter MAC Address of your device.
This shows the WAN port's IP address.
This shows the WAN port's subnet mask.
This shows the WAN port's gateway IP address.
This shows the LAN port's DHCP role - Client or None.
This shows the LAN Ethernet adapter MAC Address of your device.
This shows the LAN port's IP address.
This shows the LAN port's subnet mask.
This shows the LAN port's DHCP role - Server or Disable.
This is the device mode (Section 7.1.2 on page
set - WISP Mode.
This shows the wireless adapter MAC Address of your device.
This shows the current status of the Wireless LAN - ON or OFF.
This shows a descriptive name used to identify the NBG4615 in the wireless LAN.
This shows whether or not the NBG4615 has successfully associated with an access point -
Associated or Disassociated.
This shows the level of wireless security the NBG4615 is using.
This shows the wireless standard.
This column shows the type of data the NBG4615 is recording.
This column shows the actual data recorded by the NBG4615.
This is the total time the NBG4615 has been on.
This field displays your NBG4615's present date and time.
This displays what percentage of the NBG4615's processing ability is currently used. When
this percentage is close to 100%, the NBG4615 is running at full load, and the throughput is
not going to improve anymore. If you want some applications to have more throughput, you
should turn off other applications (for example, using bandwidth management.
This shows what percentage of the heap memory the NBG4615 is using.
This shows whether the firewall is enabled or not.
This shows whether the bandwidth management is enabled or not.
This shows whether UPnP is enabled or not.
This shows the web configurator mode you are viewing - Expert.
Click Details... to go to the Monitor > BW MGMT Monitor screen
47). Use this screen to view the amount of network bandwidth that applications running in
the network are using.
51) to which the NBG4615 is set - WISP
51) to which the NBG4615's wireless LAN is
(Section 6.4 on page
NBG4615 User's Guide