ZyXEL Communications NBG4615 User Manual page 202

Chapter 26 Bandwidth Management
Figure 128 Bandwidth Management Rule Configuration: User-defined Service
The following table describes the labels in this screen.
Table 82 Bandwidth Management Rule Configuration: User-defined Service
LABEL
BW Budget
Destination Address
Start
Destination Address End
Destination Port
Source Address Start
Source Address End
Source Port
Protocol
Apply
Cancel
See Appendix E on page 295
202
DESCRIPTION
Select Maximum Bandwidth or Minimum Bandwidth and specify the
maximum or minimum bandwidth allowed for the rule in kilobits per
second.
Enter the starting IP address of the destination computer.
The NBG4615 applies bandwidth management to the service or
application that is entering this computer.
Enter the ending IP address of the destination computer.
The NBG4615 applies bandwidth management to the service or
application that is entering this computer.
This is the port number of the destination that define the traffic type, for
example TCP port 80 defines web traffic.
Enter the starting IP address of the computer that initializes traffic for the
application or service.
The NBG4615 applies bandwidth management to traffic initiating from this
computer.
Enter the ending IP address of the computer that initializes traffic for the
application or service.
The NBG4615 applies bandwidth management to traffic initiating from this
computer.
This is the port number of the source that define the traffic type, for
example TCP port 80 defines web traffic.
Select the protocol (TCP, UDP, BOTH) for which the bandwidth
management rule applies.
If you select BOTH, enter the protocol for which the bandwidth
management rule applies. For example, ICMP for ping traffic.
Click Apply to save your customized settings.
Click Cancel to exit this screen without saving.
for commonly used services and port numbers.
NBG4615 User's Guide