Ip Pool Setup; Lan Tcp/Ip; Ip Alias; Lan Ip Screen - ZyXEL Communications NBG4615 User Manual

Chapter 18 LAN
Figure 104 LAN and WAN IP Addresses
The LAN parameters of the NBG4615 are preset in the factory with the following values:
• IP address of 192.168.1.1 with subnet mask of 255.255.255.0 (24 bits)
• DHCP server enabled with 32 client IP addresses starting from 192.168.1.33.
These parameters should work for the majority of installations. If your ISP gives you explicit DNS
server address(es), read the embedded Web Configurator help regarding what fields need to be
configured.

18.3.1 IP Pool Setup

The NBG4615 is pre-configured with a pool of 32 IP addresses starting from 192.168.1.33 to
192.168.1.64. This configuration leaves 31 IP addresses (excluding the NBG4615 itself) in the
lower range (192.168.1.2 to 192.168.1.32) for other server computers, for instance, servers for
mail, FTP, TFTP, web, etc., that you may have.

18.3.2 LAN TCP/IP

The NBG4615 has built-in DHCP server capability that assigns IP addresses and DNS servers to
systems that support DHCP client capability.

18.3.3 IP Alias

IP alias allows you to partition a physical network into different logical networks over the same
Ethernet interface. The NBG4615 supports three logical LAN interfaces via its single physical
Ethernet interface with the NBG4615 itself as the gateway for each LAN network.

18.4 LAN IP Screen

Use this screen to change the IP address for your NBG4615. Click Network > LAN > IP.
164
NBG4615 User's Guide