Static Route; Chapter 22 Static Route; Overview; Ip Static Route Screen - ZyXEL Communications NBG4615 User Manual

22.1 Overview

This chapter shows you how to configure static routes for your NBG4615.
Each remote node specifies only the network to which the gateway is directly connected, and the
NBG4615 has no knowledge of the networks beyond. For instance, the NBG4615 knows about
network N2 in the following figure through remote node Router 1. However, the NBG4615 is unable
to route a packet to network N3 because it doesn't know that there is a route through the same
remote node Router 1 (via gateway Router 2). The static routes are for you to tell the NBG4615
about the networks beyond the remote nodes.
Figure 117 Example of Static Routing Topology

22.2 IP Static Route Screen

Click Network > Static Route to open the IP Static Route screen.
NBG4615 User's Guide
C
HAPTER
2 2

Static Route

183