ZyXEL Communications NBG4615 User Manual page 24

Chapter 3 ZyXEL NetUSB Share Center Utility
The following table describes the menus in this screen.
Table 4 ZyXEL NetUSB Share Center Utility Main Screen Menus
MENU
System
Tools
Help
Auto-Connect
Printer
24
ITEM
Exit
Configuration
Auto-Connect Printer List
About
Set Auto-Connect Printer
Delete Auto-Connect Printer
DESCRIPTION
This closes the ZyXEL NetUSB Share Center Utility.
This opens the ZyXEL NetUSB Share Center Utility
configuration window.
This opens the list window that displays all of the
printing devices connected to the NBG4615.
This opens the about window, which provides
information of the utility software and driver versions.
You can set the selected printer to 'auto-connect'
after you have connected it to your computer during
inital connection. If the printer is auto-connected to
your computer, they will always be connected over
the network. You do not need to configure it manually
each time.
Click this to show your installed printer list and select
the one you want to set as auto-connected.
Note: If the computer is connecting to the shared USB
printer for the first time, you need to click
Connect and setup the printer before you can
use the Auto-Connect Printer function. See
Chapter 14 on page 121
Note: You first must install the appropriate drivers for
the printer that you intend to use.
This removes the auto-connect option from the
selected printer.
for more details.
NBG4615 User's Guide