ZyXEL Communications NBG4615 User Manual page 84

Chapter 11 Universal Repeater Mode
The following table describes the labels shown in the Status screen.
Table 34 Status Screen: Universal Repeater Mode
LABEL
Logout
Device Information
Host Name
Firmware Version
Sys OP Mode
LAN Information
MAC Address
IP Address
IP Subnet Mask
DHCP
WLAN Information
WLAN OP Mode
MAC Address
Status
Name (SSID)
Channel
Operating Channel
Security Mode
802.11 Mode
WLAN Station Status
WPS
System Status
Item
Data
System Up Time
Current Date/Time
System Resource
CPU Usage
Memory Usage
System Setting
Configuration Mode
Summary
84
DESCRIPTION
Click this at any time to exit the Web Configurator.
This is the System Name you enter in the Maintenance > General screen. It is for
identification purposes.
This is the firmware version and the date created.
This is the device mode (Section 7.1.2 on page
Repeater Mode.
This shows the LAN Ethernet adapter MAC Address of your device.
This shows the LAN port's IP address.
This shows the LAN port's subnet mask.
This shows the LAN port's DHCP role - Client or None.
This is the device mode (Section 7.1.2 on page
set - Universal Repeater Mode.
This shows the wireless adapter MAC Address of your device.
This shows the current status of the Wireless LAN - ON.
This shows a descriptive name used to identify the NBG4615 in the wireless LAN.
This shows the channel number which you select manually or the NBG4615 automatically
scans and selects.
This shows the channel number which the NBG4615 is currently using over the wireless LAN.
This shows the level of wireless security the NBG4615 is using.
This shows the wireless standard.
If the NBG4615 has successfully connected to an AP or wireless router, it displays the SSID
and MAC address of the AP or wireless router in this field.
This displays Configured when the WPS has been set up.
This displays Unconfigured if the WPS has not been set up.
Click the status to display Network > Wireless LAN > WPS screen.
This column shows the type of data the NBG4615 is recording.
This column shows the actual data recorded by the NBG4615.
This is the total time the NBG4615 has been on.
This field displays your NBG4615's present date and time.
This displays what percentage of the NBG4615's processing ability is currently used. When
this percentage is close to 100%, the NBG4615 is running at full load, and the throughput is
not going to improve anymore. If you want some applications to have more throughput, you
should turn off other applications (for example, using bandwidth management.
This shows what percentage of the heap memory the NBG4615 is using.
This shows the web configurator mode you are viewing - Expert.
51) to which the NBG4615 is set - Universal
51) to which the NBG4615's wireless LAN is
NBG4615 User's Guide